Explore our industrial-grade catalog featuring twin-spindle, multi-axis slant-bed CNC machines with custom tool setups.
In high-capacity manufacturing lines, reducing unit cost and cycle time requires multi-tasking CNC architecture.
Double turret systems allow synchronous machining operations on both the main and counter spindle. This slashes standard cycle times by up to 45%, converting complex operations into optimized parallel processing paths.
With integrated live tooling and Y-axis capabilities on the twin turrets, components are fully machined (turned, milled, cross-drilled, tapped) from raw bar stock to finished part in a single clamping setup, removing manual intervention.
Consolidating your machining tasks from separate turning and milling machines into a single Double Turret CNC Turn-Mill Center reduces factory floor footprint requirements by half while lowering power consumption.
Adapting to the pressures of modern production schedules, automated cells, and raw material variations.
Globally, manufacturers in automotive, medical electronics, and aerospace are transitioning away from dedicated single-spindle machines. The rising cost of floor space, coupled with global labor shortages, demands that machine tools operate autonomously for longer periods. Double turret CNC lathes address this by enabling complex simultaneous cuts, balanced turning, and real-time handoffs between main and sub-spindles.
By using synchronized dual paths, operators can run upper and lower turrets against a single workpiece simultaneously to suppress vibration and double the chip removal rate. This is critical when machining tough alloys like Inconel, Titanium, and Stainless Steel, which are standard in modern aerospace and implant fabrication.
Integrating automation options such as short/long bar feeders, gantry loaders, and robotic part unloaders turns a Double Turret CNC Turn-Mill Center into an independent production cell. This reduces dependence on specialized operators, allowing a single technician to run multiple machines. Nuoxin Intelligent Equipment provides tailor-made turn-key engineering solutions to integrate these automation nodes directly into your current digital workflow.
Zhongshan Nuoxin Intelligent Equipment Co., Ltd. - A Legacy of Engineering Excellence Since 2004.
Established in 2004, Zhongshan Nuoxin Intelligent Equipment Co., Ltd. is a high-tech enterprise. The company specializes in the research and production of precision processing equipment such as CNC numerical control lathes, turning-milling combined machines, and vertical machining centers. At the same time, the company is dedicated to providing customers with support for precision part processing technology and CNC equipment operation training, as well as handling after-sales issues.
The company has been deeply engaged in the CNC lathe industry for over 20 years and has successively received titles such as "Guangdong Province High-tech Enterprise" and "Zhongshan Machinery Chamber Council Member Unit". It is committed to creating more value for its customers and providing comprehensive solutions that meet the processing needs of customers.
Our company is located in the Industrial Development Zone of Zhongshan City, Guangdong Province, with a self-owned factory area of over 20,000 square meters. It has a professional design and production manufacturing team. Continuous innovation development, standardized production operations, and strict product quality control management have enabled the company to successfully apply for a number of product invention and utility model patents and successfully pass international ISO9001 and ISO14001 system certifications.
The company's product quality and after-sales service are highly recognized by customers. Its business scope has covered aviation, automobiles, motorcycles, construction machinery, home appliances, plumbing and bathroom, lighting, medical and optoelectronics, etc. The company also provides system technical service support to customers, from pre-sale technical consultation to in-sale installation and commissioning and technical training, to after-sale maintenance services and customer follow-ups. Our after-sales team can respond promptly and solve your worries at any time.
How our double turret configurations deploy across specific industrial hubs worldwide.
As electric vehicle (EV) production expands, Tier-1 automotive suppliers in hubs like Germany, Italy, and the Midwestern United States require micro-precision rotor shafts, gear systems, and complex valves. Our Twin-Spindle CNC Turn-Mill Centers process tough materials under rapid cycles. Balanced turning with upper and lower turrets ensures zero shaft deflection over long production runs.
Precision medical device clusters in places like Tuttlingen (Germany), Massachusetts, and California rely on high-stability gang tool and turret lathes to turn bone screws, orthopedic implants, and endoscope components. Here, our NXX-26AS and NXX-36A1 series models achieve excellent surface finishes (under Ra 0.4 μm), reducing the need for post-machining polishing.
Aerospace actuators, landing gear fittings, and engine fasteners require high dimensional consistency. By utilizing our slant-bed CNC configurations, manufacturers are able to complete multi-axis drilling and milling of complex geometries in a single setup, ensuring high coaxiality and concentricity between turned surfaces.
A look at the future of smart machining: integration with AI, predictive maintenance, and green technology.
Spindle heat generation and changing room temperatures can cause minor shifts in machining accuracy over long runs. Our next-generation Double Turret systems feature digital thermal sensor networks that feed real-time expansion data directly into the CNC controller. The system dynamically micro-compensates for axis coordinates, keeping tolerances under 3 microns even during 24-hour machining cycles.
To align with Industry 4.0 standards, our machinery supports standard communication protocols like OPC-UA. This enables factory managers to monitor spindle loads, cycle progress, and tool life remotely via centralized ERP systems or mobile apps, paving the way for fully automated "lights out" night shifts.
By optimizing high-efficiency servo drives and introducing regenerative braking systems on our main and sub-spindles, our machines reduce average power consumption. We also support advanced minimum quantity lubrication (MQL) cooling systems, reducing coolant disposal volumes and clean-up costs.
Reliable operations backed by certifications, responsive field support, and custom setups.
Every Double Turret CNC Turn-Mill center leaving our facility complies with major regional standards. We integrate CE-compliant safety locks, safety glass shielding, and enclosed working areas to ensure operators work in a protected environment. Electrical cabinets are designed to meet ISO standards and are compatible with international voltage grids.
We provide a dedicated technical framework for every client:
Answers to common questions about selecting, operating, and configuring Double Turret CNC Turn-Mill systems.
Review additional configurations engineered for high-precision components and complex machining profiles.
Looking to the future, our company will consistently adhere to the business philosophy of "honesty, responsibility, innovation, and win-win", and implement the quality policy of "quality improvement, customer satisfaction first". We will continue to improve and provide continuous services to offer customers higher-quality products and more satisfactory services! We look forward to your visit and cooperation!
Nuoxin