Nuoxin
1 / 2
Heavy-Duty Integral Sleeve Spindle: Engineered for sustained heavy-cutting conditions, the spindle features a robust integral sleeve-type design. It integrates a "Three-Front, Two-Rear" configuration of imported precision bearings, powered by a rear-mounted servo motor. This combination delivers a consistent output of high speed, high precision, and exceptional rigidity.
Robust Bed Architecture: Utilizing a 30° slant-bed layout, the machine base is cast from high-quality resin-sand cast iron. The internal structure features a dense reinforcement ribbing system, delivering a superior combination of high rigidity, exceptional vibration damping, ergonomic operator convenience, and efficient automatic chip evacuation.
High-Performance Linear Motion System: The X and Z axes are equipped with high-rigidity, heavy-duty linear guideways and precision pre-tensioned ball screws. Driven by direct-coupled servo motors and supported by an automatic forced lubrication system, the axes achieve rapid traverse speeds of up to 30 m/min while ensuring superior positioning accuracy and minimal thermal deformation.
Advanced Y-Axis Servo Power Turret: Equipped with a high-precision Y-axis box-way dual-side servo power turret, this system offers exceptional reliability and low failure rates. It supports rapid, nearest-path tool indexing for maximum efficiency. The turret disk is designed for flexible tool loading, unaffected by additional live tool attachments or workpiece dimensions, ensuring superior adaptability for diverse machining tasks.
Integrated Multi-Tasking Machining Cell: This represents the ultimate highlight of the machine. By integrating rear-mounted servo main and sub-spindles, a Y-axis servo power turret, and imported precision gear-driven live tooling (for both radial and axial milling), we have built a complete, high-performance turn-mill unit.
Advanced Hydraulic & Safety Systems: The hydraulic station utilizes high-performance variable displacement pumps and core components from top-tier brands, equipped with an integrated air-cooling system. This ensures exceptionally quiet operation and precise oil temperature control even during extended shifts.
The machine features a stylish, fully enclosed protective housing that is completely waterproof and chip-proof. For maximum operator protection, the sliding doors are equipped with safety interlocks, ensuring a secure and user-friendly working environment.
| Item | Unit | NXX-46ESY |
| Max. Swing Diameter Over Bed | mm | Φ500 |
| Max. Machining Length | mm | 420 |
| Max. Swing Diameter Over Turret Sub-plate | mm | Φ500 |
| Max. Turning Diameter (Disk/Shaft) | mm | Φ260/Φ260 |
| Spindle / Sub-spindle Bore Diameter | mm | φ56/φ56 |
| Max. Bar Capacity (Main / Sub-spindle) | mm | Φ45/φ45 |
| Spindle Speed Range | r/min | 0-4000 |
| Spindle Speed Steps | Steps | CV |
| Spindle / Sub-spindle Nose | - | Flange Type A2-5/A2-5 |
| Main / Sub-spindle Motor Power | Kw | 11 |
| Slant Bed Angle | ° | 30 |
| X-axis Rapid Traverse Rate | m/min | 30 |
| Z1 / Z2-axis Rapid Traverse Rate | m/min | 30 |
| Y-axis Rapid Traverse Rate | m/min | 30 |
| X-axis Max. Travel (One-way) | mm | 330 |
| Z1 / Z2-axis Max. Travel | mm | 540/580 |
| Y-axis Max. Travel | mm | 110 |
| X-axis Servo Motor Power | Kw | 3.1 |
| Z1 / Z2-axis Servo Motor Power | Kw | 2.4/2.4 |
| Spindle / Sub-spindle Radial & Axial Runout | mm | ≤0.003 |
| Spindle / Sub-spindle Flatness Accuracy | mm | ≤0.01/Φ100 |
| Main / Sub-spindle Handover Concentricity | mm | ≤0.01 |
| Live Tooling Spindle Taper Runout | mm | ≤0.006 |
| Repeatability Accuracy (X-axis) | mm | ±0.0025 |
| Repeatability Accuracy (Z-axis) | mm | ±0.0025 |
| C-Axis Repeatability | mm | 0.01 |
| Standard Turret Type | - | Servo Power Turret |
| Max. Tool Capacity | pcs | 12 |
| Tool Indexing Time (Adjacent) | S | 0.3 |
| Tool Size (O.D. Tool) | mm | 25 × 25 |
| Tool Size (Boring Bar Diameter) | mm | Φ40 |
| Live Tooling Type | - | ER25/ER32 + Y-axis |
| Live Tool Motor Power | Kw | 3.1+0.75+2.4 |
| Max. Live Tool Speed | r/min | 3000-6000 |
| Max. Clamping Capacity | mm | Φ16/Φ20 |
| Max. Tapping Capacity | mm | M10/14 |
| Total Power Capacity | Kw | 37 |
| Machine Weight (Approx.) | kg | 5500 |
| Machine Dimensions (L × W × H) | mm | 3210 × 2050 × 2250 |
